Vstarcam C42 720P WiFi HD Fisheye Lens Motion Detection - Pink - 3522272414

Vstarcam C42 720P WiFi HD Fisheye Lens Motion Detection

Description:
Made for smart home living, simple design but powerful functions!

Parameter:
General
APP: Eye4
Compatible operation systems: flushbonading Linux
IP camera performance: motion detection, night vision
Infrared distance: 10m
Imaging area: 4.4 x 2.52mm
Presetting bit: 15

Power
Working voltage: DC 5 / 2A + / - 0.3V
Power dissipation: 3 - 7W
Length of power line: 2m

Network
Protocol: TCP / IP, HTTP, TCP, UDP, SMTP, FTP, DHCP, DNS, DDNS, NTP, UPNP, RTSP, P2P
Wireless: WiFi 802.11 b /g / n
Network port: 10Mbps / RJ-45
Safety: Administrator password protection

System and Hardware Info
Alarm notice: Email / FTP
Pan / tilt-horizontal angle: 355 degree
Pan / tilt-vertical angle: 80 degree

Video Image Audio
Video compression format: H.264 main profile / H.264 baseline profile / MJPEG / JPEG baseline
Sensor: 1 / 4 inch CMOS
Frame rate ( FPS ): 25fps
Minimum illumination: 0.8Lux / F1.4, 0.3Lux / F1.4
S / N ration: more than 39dB
Audio input: built-in mic
Audio output: built-in speaker
Code rate: CBR / VBR
Output code rate range: 128 - 4096kpbs
Sampling frequency / width: 8KHz / 16bit
Compression standard / rate: ADPCM / 32kbps
Antenna: 3dBi

Physical Environment
Operate temperature: -20 - 70 Deg.C
Operate humidity: 90 percent

Features:
Smart link
- Support connecting by WiFi, realizes remote control.
Motion detection
- Can be set up to take photos and e-mail them to you if the alarm is triggered.
Support electronic PTZ
- The APP support PTZ control and all degree pan / tilt control, no monitoring blind spots.
External WiFi antenna
- Standard brackets, stand alone or wall mounting, and the camera angle is adjustable.
Fluent video and clear picture
- 720P HD resolution gives you detailed images.
TF card memory
- 24 hours continuous recording, old videos will be covered by new data when it's full.
Support day / night vision
- IR-cut, it will automatically switch on when in dark situation.
ICR double filter
- Real picture reproduction for different lighting environment.

How to use:
Please search "Eye4" in Apple Store, Android market or Google Play to download APP firstly.
Enter into your phone's WLAN to set, choose the camera's WiFi name at the bottom of the camera, then enter the password, click the connect button.
Open APP to add and connect the device.

Note:
The antenna is built into the IP camera.
Only recording for over ten minutes, the video files will be generated.
After inserting the memory card, if you remove it in the halfway, it needs to be formatted then you can use it normally.